 |
Work Item Reference | ETSI Doc. Number |
STF | Technical Body in Charge |
Download Standard
|
||
| REN/ERM-EMC-399 | EN 303 446-2 | ERM WGEMC | |||||
| Current Status (Click to View Full Schedule) |
Latest Version |
Cover Date | Standstill | Creation Date | |||
|
|
1.2.1 | 2019-10-01 | View Standstill Information | 2018-10-10 | |||
| Rapporteur | Technical Officer | Harmonised Standard | |||||
Dirk Eyfrig
|
Antoine Mouquet
|
No | View Transposition Data | ||||
| Title |
ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment; Part 2: Requirements for equipment intended to be used in industrial locations EMC of combined and/or integrated equipment: Industrial locations |
||||||
|
Scope and Field of Application |
Part of a series of standards for combined and/or integrated radio and non-radio equipment (EN 303 466-2), where part 1 for household appliances is currently developed under ERM-EMC-348. This part of the standard sets requirements for radio enabled products designed for and intendend to be used in industrial locations in respect of ElectroMagnetic Compatibility (EMC) under article 3.1(b) of Directive 2014/53/EU. This standard, together with ?the relevant CENELEC EMC product, product family or generic standard(s) for similar non radio-enabled products designed for and intendend to be used in industrial locations; plus ?ETSI EN 301 489-1 and ?the relevant parts of the ETSI EN 301 489-series for the specific radio technologies deployed specifies the applicable test conditions, performance assessment and performance criteria for radio enabled products designed for and intendend to be used in industrial locations . Technical specifications related to the antenna port of the equipment are not included in this standard. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The environmental classification and the emission and immunity requirements used in this standard are as stated in the relevant CENELEC EMC standard for similar non radio-enabled products, except for any special conditions included in this standard. The content and conclusions of the newly developed EG 203 367 will be taken into account during the development of this standard. Products within the scope of this standard are those falling under the scope of: 1.EN 50270:2015-01Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. 2.EN 55011:2009-11Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement. 3.EN 55011/A1:2010-07Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement. 4.EN 60947-5-2:2007-12Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches 5.EN 60947-5-2/A1:2012-11Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches 6.EN 60947-5-3:201311Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) 7.EN 60947-5-6:2000-01Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements ? DC interface for proximity switches and switching amplifiers (NAMUR) 8.EN 60947-5-7:2003-09Low-voltage switchgear and controlgear - Part 5-7: Requirements for proximity devices with analogue output 9.EN 60947-5-9:2007-11Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches 10.EN 61326-1:2013-01Electrical equipment for measurement, control and laboratory use ? EMC requirements ? Part 1: General requirements 11.EN 61326-2-3:2013-01Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning 12.EN 61326-2-5:2013-01Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 13.EN 61000-6-2:2005-08Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments 14.EN 61000-6-3:2007-01Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments 16.EN 61000-6-4:2007-01Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environment. 17.EN 61000-6-4/A1:2011-02Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environment. 18.EN 61131-2:2007-09Programmable controllers. Equipment requirements and tests 19.EN 61800-3:2004-12Adjustable speed electrical power drive systems. EMC requirements and specific test methods 20.EN 61800-3/A1:2012-03Adjustable speed electrical power drive systems. EMC requirements and specific test methods (list to be completed during creation of the standard) | ||||||
|
Supporting Organizations |
Ofcom (U.K.), Siemens AG, Endress + Hauser GmbH & Co. KG, Emerson Process Mgt Limited, SICK AG | ||||||
