How to
create a Change Request for the EMTEL requirements documents
-
Download the Change Request form (MS Word format).
-
Fill in all relevant areas on the CR cover sheet. See
Annex A below for further detail.
-
Open the document to which you wish to make a change. It is very
IMPORTANT to ensure that you are using the latest version of the document
to make the change. If in doubt, contact
EMTELsupport@etsi.org
-
Copy the subclause(s) from the document that you want to change
and paste it into the CR form, starting on page 2. Enter your changes with
revision marks in the copied text.
-
Send your CR to
EMTELsupport@etsi.org, who will submit it to EMTEL for approval.
Examples of
expressions of provision in ETSI specifications:
To ensure that everybody else understands
your proposed changes the same way that you do, it is very important to keep to
the following rules:
SHALL:
To be used to indicate a requirement. e.g. "The ACH shall be used for
sending RFCH in the downlink" is correct. Do not use "The ACH is used for
sending RFCH in the downlink" or "The ACH must be used for sending RFCH in the
downlink".
SHOULD:
To be used to indicate recommendation. i.e. if, among several
possibilities one is recommended as particularly suitable, without mentioning or
excluding others, or that a certain course of action is preferred but not
necessarily required, or that (in the negative form) a certain possibility or
course of action is deprecated but not prohibited.
MAY:
To be used to indicate permission. To be used instead of phrases such as
"is permitted", "is allowed" or is permissible". The opposite of "may" is "need
not".
CAN:
To be used to indicate possibility and capability. To be used instead of
phrases such as "be able to", "there is a possibility of" or "it is possible
to".
ANNEX A The CR cover sheet
This annex provides further information on how to fill out
the cover sheet of a CR.
The header:
·
The change request number. This is a 6 digit
number and is allocated by the ETSI Secretariat (contact
EMTELsupport@etsi.org). A separate CR
number is needed for each type of CR category (Editorial modification, Addition
of a requirement, or Technical modification). Several subclauses related to the same
category can be entered into one CR.
·
The submission date.
The title box:
·
The Special Report number (SR xxx xxx)
·
The Current version number of the document (V.x.x.x).
Author name:
·
The CR author's name.
Organization:
·
The CR author's organization.
E-mail address:
·
The CR author's e-mail address.
Subject:
·
One line (only) of concise text
that describes the subject of the CR. Details should be put under "reason for
change".
examples: "Clarification
to the installation of user access."
"Alignment of
cross-border operations."
“Editorial
corrections to clauses xx, xx and xx”
Category:
·
Choose one category only.
Reason:
·
This should be 1 to 10 lines of text that
describes in further detail the reasons why the change is necessary and how the
change is done.
Clauses affected:
·
Each subclause that is affected by the change
should be listed here. New subclause number can be followed by " (new) ".
* If you should have any questions about the CRs, you are always welcome to
contact EMTELsupport@etsi.org *
|